The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing all 10 results

  • Compare

    APA7-500: Reconfigurable Xilinx® Artix®-7 FPGA Module

    • 52,160 logic cells
    • Reconfigurable Xilinx Artix-7 FPGA
    • PCI Express bus interface
    • Conduction or air cooled
    The APA7-500 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express.

    Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.

    Select options
  • Compare

    APZU: User-Configurable AMD Zynq® UltraScale+ MPSoC I/O Modules

    • AMD Zynq UltraScale+ MPSoC
    • ARM Cortexâ„¢ A53 & R5 CPUs
    • Programmable logic
    • PCIe Bus Interface
    APZU series modules provide a programmable AMD Zynq UltraScale+ multiprocessor system on a chip (MPSoC). This MPSoC combines a feature-rich ARM-based processing system and programmable logic in a single device. Click here to watch a short video highlighting the features of the APZU Series.
    Select options
  • Compare

    AXM-A30: Analog Input Extension I/O Module for PMC FPGAs

    • High-Speed Analog Input
    • Two Differential Channels
    • Two 16-bit A/D Channels
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), and PMC-VLX/VSX/ VFX (Virtex-5 FPGA) modules.
    Select options
  • Compare

    AXM-A75: Multi-function I/O for PMC & XMC FPGAs

    • 16 analog inputs, simultaneous A/D
    • 8 analog outputs, simultaneous D/A
    • 16 digital I/O channels
    The AXM-75 is a multi-function I/O module that adds A/D, D/A, and digital I/O signal processing functions to an FPGA board. These extension I/O modules plug directly onto many Acromag reconfigurable FPGA cards equipped with an AXM mezzanine connector.
    Select options
  • Compare

    AXM-D Series: Digital I/O Extension Modules for PMC & XMC FPGAs

    • Plug-In I/O Modules
    • Choose from four I/O Options
    • JTAG Support Option
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), PMC-VLX/VSX/VFX (Virtex-5 FPGA) modules, and PMC-SLX (Spartan-6 FPGA) modules.
    Select options
  • Compare

    AXM-Z01: Peripheral I/O Extension Modules for XMC FPGAs

    • Gigabit ethernet over copper wire 1000BASE-T from the Zynq PS
    • USB 3.0 from the Zynq PS
    • USB-UART from the Zynq PS provides a debug terminal port
    • Mini Display Port from the Zynq PS
    AXM module with RJ45 Gigabit Ethernet, USB 3.0, mini DisplayPort, and USB UART mini-B ports.
    Select options
  • Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options
  • Compare

    PMC408: Digital Input/Output Module, High Voltage I/O

    Consult factory for long-term availability.
    • 32 bi-directional digital inputs and/or outputs
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts  (up to 8 channels)
    Select options
  • Compare

    PMC424: Digital Input/Output Module, Differential, TTL, Counter/Timer

    • 24 differential I/O, 16 TTL I/O
    • Four 16-bit counter/timer channels,  six operating modes
    • Change of state and level interrupts
    The PMC424 digital I/O module provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multi-function counter/timers.
    Select options
  • Compare

    PMC464: Digital I/O Module, Counter/Timer

    Consult factory for long-term availability.
    • 64 TTL bi-directional I/O
    • Four 16-bit counter/timer channels with six operating modes
    • Change of state and level interrupts
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems