The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 21 results

  • Compare

    AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card

    • Four IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8625A is a nonintelligent slave board that interfaces four IP modules to the CompactPCI (cPCI) bus.
    Select options
  • Compare

    AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O

    • Two IP module slots
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.  
    Select options
  • Compare

    AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O

    • Two IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8635A is a non-intelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.
    Select options
  • Compare

    APA7-500: Reconfigurable Xilinx® Artix®-7 FPGA Module

    • 52,160 logic cells
    • Reconfigurable Xilinx Artix-7 FPGA
    • PCI Express bus interface
    • Conduction or air cooled
    The APA7-500 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express.

    Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.

    Select options
  • Compare

    APZU: User-Configurable AMD Zynq® UltraScale+ MPSoC I/O Modules

    • AMD Zynq UltraScale+ MPSoC
    • ARM Cortexâ„¢ A53 & R5 CPUs
    • Programmable logic
    • PCIe Bus Interface
    APZU series modules provide a programmable AMD Zynq UltraScale+ multiprocessor system on a chip (MPSoC). This MPSoC combines a feature-rich ARM-based processing system and programmable logic in a single device. Click here to watch a short video highlighting the features of the APZU Series.
    Select options
  • Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options
  • Compare

    PMC482: Counter/Timer Module

    • Ten 16-bit counter/timers, TTL
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    Select options
  • Compare

    PMC483: Counter/Timer Module

    • Four 16-bit counters - TTL, and four 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
     
    Select options
  • Compare

    PMC484: Counter/Timer Module

    • Six 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
     
    Select options
  • Compare

    XMC-7A CC: User-Configurable Conduction-Cooled Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA.
    • XMC module with PCIe interface
    • Conduction-Cooled
    XMC-7A200CC modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • I/O Extension Mezzanine Modules
    Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.  
    Select options
  • Compare

    XMC-7A50-AP323: XMC Module with Artix 7 FPGA and High-Density I/O

    • Reconfigurable AMD Artixâ„¢ 7 FPGA
    • 48 Digital I/O
    • 20 Diff or 40 SE Analog Inputs
    • 16-bit ADC
    The XMC-7A50-AP323 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express. These XMC boards feature a best-in-class Artix 7 interface to deliver the industry’s lowest power and high performance.
    Select options
  • Compare

    XMC-7AWP: User-Configurable Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • Write-protected flash
    Acromag’s XMC-7AWP modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7K AX: User-Configurable AMD Kintex 7 FPGA Modules with Plug-In I/O

    • Logic-optimized AMD Kintex 7 FPGA
    • XMC module with PCIe interface
    • I/O Extension Mezzanine Modules
    XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7K CC: User-Configurable Conduction-Cooled AMD Kintex 7 FPGA Modules

    • Logic-optimized AMD Kintex 7 FPGA
    • XMC module with PCIe interface
    • Conduction-Cooled
    Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7K F: User-Configurable AMD Kintex 7 FPGA Modules with Dual SFP+ Ports

    • XMC module with PCIe & SFP+/AMD Aurora interface
    • Logic-optimized AMD Kintex 7 FPGA
    • 10-Gigabit Ethernet
    Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial interface. The logic-optimized FPGA is well-suited for a broad range of applications.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems