The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 35 results

  • Compare

    AVME9660A: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • 50-pin front panel header connectors
    • Supports two interrupt channels per IP
    • Standard IP module interface
    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus.
    Select options
  • Compare

    AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card

    • Four IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8625A is a nonintelligent slave board that interfaces four IP modules to the CompactPCI (cPCI) bus.
    Select options
  • Compare

    AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O

    • Two IP module slots
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.  
    Select options
  • Compare

    AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O

    • Two IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8635A is a non-intelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.
    Select options
  • Compare

    ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules

    • Front I/O access
    • Two isolated I/O expansion slots (AcroPack® or mPCIe)
    The ACPS3310 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules

    • Rear I/O access
    • Two I/O expansion slots (AcroPack or mPCIe)
    The ACPS3320 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    AP408: High Voltage Digital Input/Output Module

    • 32 Digital I/O Channels
    • High impedance
    • PCIe Bus Interface
    The AP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP408.
    Select options
  • Compare

    AP418: High Voltage Digital Input/Output Modules

    • 16 digital I/O channels
    • High impedance
    • Extended temperature
    • PCIe Bus Interface
    The AP418 monitors or controls the on/off (high/low) status of up to 16 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP418.
    Select options
  • Compare

    AP441: Isolated Digital Input with Interrupts Module

    • 32 isolated digital input channels
    • Extended temperature: -40 to 85°C
    • PCIe bus interface
    AP441 modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels. Click here to watch a short video highlighting the features of the AP441.
    Select options
  • Compare

    AP445: Isolated Digital Output Module

    • 32 bipolar solid-state relays
    • 0 to ±60V DC or AC voltage input
    • Extended temperature
    • PCIe Bus Interface
    AP445 modules provide 32 isolated solid-state relay outputs to safely control discrete devices. Click here to watch a short video highlighting the features of the Acromag AP445.
    Select options
  • Compare

    AP471: TTL Level Digital I/O

    • 48 bidirectional input/output channels
    • Digital I/O
    • Wide temperature range
    • PCIe Bus interface
    The AP471 provides 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices. Click here to watch a short video highlighting the features of the Acromag AP471.
    Select options
  • Compare

    APA7-500: Reconfigurable Xilinx® Artix®-7 FPGA Module

    • 52,160 logic cells
    • Reconfigurable Xilinx Artix-7 FPGA
    • PCI Express bus interface
    • Conduction or air cooled
    The APA7-500 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express.

    Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.

    Select options
  • Compare

    APC8620A: Non-intelligent PCI Bus Carrier for IP Modules

    • Holds five IP modules
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.
    Select options
  • Compare

    APC8621A: Non-intelligent PCI Bus Carrier, Half-Length

    • Nonintelligent PCI bus carrier
    • Holds three IP modules
    • Plug-and-play carrier configuration and interrupt support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis.
    Select options
  • Compare

    APCe8650: Non-intelligent PCI Express Bus Carrier

    • Non-intelligent PCIe bus carrier
    • Holds four IP modules
    • Plug-and-play carrier configuration and interrupt (MSI and INTA#) support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces standard Industry Pack (IP) mezzanine modules to a PCI Express bus on a PC-based computer system.
    Select options
  • Compare

    APZU: User-Configurable AMD Zynq® UltraScale+ MPSoC I/O Modules

    • AMD Zynq UltraScale+ MPSoC
    • ARM Cortexâ„¢ A53 & R5 CPUs
    • Programmable logic
    • PCIe Bus Interface
    APZU series modules provide a programmable AMD Zynq UltraScale+ multiprocessor system on a chip (MPSoC). This MPSoC combines a feature-rich ARM-based processing system and programmable logic in a single device. Click here to watch a short video highlighting the features of the APZU Series.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems