The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 25 results

  • Compare

    AP220: 12-Bit DAC Module

    • 12-bit DAC
    • 16 channels voltage outputs
    • Extended temperature range
    • PCIe bus interface
    The AP220 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP220.  
    Select options
  • Compare

    AP225: 12-Bit D/A Converter Voltage Waveform Output Module

    • 12-bit DAC
    • 16 channels voltage outputs
    • Wide temperature range
    • PCIe bus interface
    The AP225 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP225 is ideal for waveform generation application that require high speed capabilities. Click here to watch a short video highlighting the features of the Acromag AP225.
    Select options
  • Compare

    AP226: 12-bit DAC Module

    • 12-bit DAC
    • 8 channels voltage output
    • Isolated analog voltage output
    • Extended temperature range
    • PCIe bus interface
    The AP226 outputs analog voltage signals to drive up to 8 devices. When used with a carrier that holds four AcroPack modules, up to 32 voltage outputs can be obtained from a single card cage slot.
    Select options
  • Compare

    AP231: 16-Bit DAC Module

    • 16-bit DAC
    • 16 channel voltage output
    • Wide temperature range
    • PCIe bus interface
    The AP231 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack® modules, up to 32 voltage outputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP231.
    Select options
  • Compare

    AP235: 16-Bit DAC Voltage Waveform Output Module

    • 16-bit DAC
    • 16 channels voltage output
    • Waveform memory
    • Extended temperature range
    • PCIe bus interface
    The AP235 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP235 is ideal for waveform generation application that require high speed capabilities. Click here to watch a short video highlighting the features of the Acromag AP235.
    Select options
  • Compare

    AP236: Isolated 16-bit DAC Module

    • 16-bit DAC
    • 8 channels voltage output
    • Isolated analog voltage output
    • PCIe bus interface
    The AP236 outputs analog voltage signals to drive up to 8 devices. When used with a carrier that holds four AcroPack modules, up to 32 voltage outputs can be obtained from a single card cage slot.
    Select options
  • Compare

    AP323: 16-Bit ADC High Density Analog Input Module

    • 16-bit ADC
    • 20 differential or 40 single-ended channels
    • Wide temperature range
    • PCIe bus interface
    The AP323 AcroPack model monitors 20 differential or 40 single-ended input channels. When used with a carrier that holds four AP modules, up to 160 inputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP323.
    Select options
  • Compare

    AP341: 14-Bit High-Density ADC Module

    • 14-bit ADC with simultaneous multi-channel conversion
    • 16 differential inputs with ±10V DC input range
    • 8µs conversion time (125kHz) for 8-ch. bank
    The AP341 AcroPack provides fast, high resolution, simultaneous A/D conversion of up to eight channels. Simultaneous channel conversion and on-board memory enable megahertz throughput rates. Programmable interrupts simplify data acquisition by providing greater control. Click here to watch a short video highlighting the features of the Acromag AP341.
    Select options
  • Compare

    AP342: 14-bit High-Density Isolated ADC Module

    • 14-bit ADC with simultaneous multi-channel conversion
    • 12 differential inputs with ±10V DC input range
    • 8μs conversion time (125kHz) for 6-ch. bank
    The AP342 AcroPack provides fast, high resolution, simultaneous A/D conversion of up to six channels. Simultaneous channel conversion and on-board memory enable megahertz throughput rates. Programmable interrupts simplify data acquisition by providing greater control.
    Select options
  • Compare

    APA7-EDK: Engineering Design Kit

    • CD containing
      • schematics
      • parts list
      • part location drawing
      • example VHDL source
      • other utility files.
    • One kit required
    Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.
    Select options
  • Compare

    APC-PMC: Non-intelligent PMC Carrier Card

    • Half-length PCI card
    • Holds one PMC card
    • 32-bit 66 MHz PCI interface
    This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard PCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the PCI card slot edge connector.
    Select options
  • Compare

    APC8620A: Non-intelligent PCI Bus Carrier for IP Modules

    • Holds five IP modules
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.
    Select options
  • Compare

    APC8621A: Non-intelligent PCI Bus Carrier, Half-Length

    • Nonintelligent PCI bus carrier
    • Holds three IP modules
    • Plug-and-play carrier configuration and interrupt support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis.
    Select options
  • Compare

    APSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Programming interface with function routines for AcroPack modules/carriers.
    • Customizable for other operating systems.
    Select options
  • Compare

    APZU-EDK: Engineering Design Kit

    Acromag’s Engineering Design Kit (EDK) provides an FPGA generated firmware example design that provides host access to the hardware digital I/O on the APZU module. The example is implemented using the Xilinx Vivado® development environment and offers a starting point from which customers can develop their customized applications.
    • CD containing
      • schematics
      • parts list
      • part location drawing
      • example Vivado and Vitis project files
      • other utility files.
    • One kit required
     
    Select options
  • Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems