The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 22 results

  • Compare

    AP220: 12-Bit DAC Module

    • 12-bit DAC
    • 16 channels voltage outputs
    • Extended temperature range
    • PCIe bus interface
    The AP220 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP220.  
    Select options
  • Compare

    AP225: 12-Bit D/A Converter Voltage Waveform Output Module

    • 12-bit DAC
    • 16 channels voltage outputs
    • Wide temperature range
    • PCIe bus interface
    The AP225 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP225 is ideal for waveform generation application that require high speed capabilities. Click here to watch a short video highlighting the features of the Acromag AP225.
    Select options
  • Compare

    AP226: 12-bit DAC Module

    • 12-bit DAC
    • 8 channels voltage output
    • Isolated analog voltage output
    • Extended temperature range
    • PCIe bus interface
    The AP226 outputs analog voltage signals to drive up to 8 devices. When used with a carrier that holds four AcroPack modules, up to 32 voltage outputs can be obtained from a single card cage slot.
    Select options
  • Compare

    AP231: 16-Bit DAC Module

    • 16-bit DAC
    • 16 channel voltage output
    • Wide temperature range
    • PCIe bus interface
    The AP231 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack® modules, up to 32 voltage outputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP231.
    Select options
  • Compare

    AP235: 16-Bit DAC Voltage Waveform Output Module

    • 16-bit DAC
    • 16 channels voltage output
    • Waveform memory
    • Extended temperature range
    • PCIe bus interface
    The AP235 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP235 is ideal for waveform generation application that require high speed capabilities. Click here to watch a short video highlighting the features of the Acromag AP235.
    Select options
  • Compare

    AP236: Isolated 16-bit DAC Module

    • 16-bit DAC
    • 8 channels voltage output
    • Isolated analog voltage output
    • PCIe bus interface
    The AP236 outputs analog voltage signals to drive up to 8 devices. When used with a carrier that holds four AcroPack modules, up to 32 voltage outputs can be obtained from a single card cage slot.
    Select options
  • Compare

    AP323: 16-Bit ADC High Density Analog Input Module

    • 16-bit ADC
    • 20 differential or 40 single-ended channels
    • Wide temperature range
    • PCIe bus interface
    The AP323 AcroPack model monitors 20 differential or 40 single-ended input channels. When used with a carrier that holds four AP modules, up to 160 inputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP323.
    Select options
  • Compare

    AP341: 14-Bit High-Density ADC Module

    • 14-bit ADC with simultaneous multi-channel conversion
    • 16 differential inputs with ±10V DC input range
    • 8µs conversion time (125kHz) for 8-ch. bank
    The AP341 AcroPack provides fast, high resolution, simultaneous A/D conversion of up to eight channels. Simultaneous channel conversion and on-board memory enable megahertz throughput rates. Programmable interrupts simplify data acquisition by providing greater control. Click here to watch a short video highlighting the features of the Acromag AP341.
    Select options
  • Compare

    AP342: 14-bit High-Density Isolated ADC Module

    • 14-bit ADC with simultaneous multi-channel conversion
    • 12 differential inputs with ±10V DC input range
    • 8μs conversion time (125kHz) for 6-ch. bank
    The AP342 AcroPack provides fast, high resolution, simultaneous A/D conversion of up to six channels. Simultaneous channel conversion and on-board memory enable megahertz throughput rates. Programmable interrupts simplify data acquisition by providing greater control.
    Select options
  • Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options
  • Compare

    IP400: Digital Input Module, High Voltage Inputs

    • 40 input channels
    • 0-60V DC input range
    • Change-of-state/level interrupts (up to 12 channels)
    The IP400 can monitor the on/off (high/low) status of up to 40 devices.
    Select options
  • Compare

    IP405: Digital Output Module, High Voltage Outputs

    • 40 low-side switch output channels
    • 0-60V DC output range
    • High output current (up to 1A per channel)
    The IP405 controls up to 40 low-side switches (open-drain MOSFETs).    
    Select options
  • Compare

    IP408: Digital Input/Output Module, High Voltage I/O

    • 32 bi-directional digital input and/or output channels
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts (up to 8 channels)
    The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.
    Select options
  • Compare

    IP409: Digital Input/Output Module, Differential I/O

    • 24 differential digital input and/or output channels
    • Ruggedized RS-422A/485 transceivers
    • Interrupt support on all channels (change-of-state and high or low level transition)
    The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination.
    Select options
  • Compare

    IP440A: Digital Input Module, Isolated

    • 32 port-isolated input channels
    • ±60V AC/DC input (three ranges)
    • Interrupt support for each channel
    IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.
    Select options
  • Compare

    IP445A: Digital Output Module, Isolated

    • 32 port-isolated output channels (bipolar solid state relays)
    • ±60V AC/DC output
    • High/low-side switch configuration
    IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems