The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 30 results

  • Compare

    AVME9660A: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • 50-pin front panel header connectors
    • Supports two interrupt channels per IP
    • Standard IP module interface
    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus.
    Select options
  • Compare

    AcPC482: Counter/Timer with Quadrature

    • Ten 16-bit counter/timers, TTL
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    AcPC483: Counter/Timer with Quadrature

    • Four 16-bit counters - TTL, and four 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    AcPC484: Counter/Timer with Quadrature

    • Six 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card

    • Four IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8625A is a nonintelligent slave board that interfaces four IP modules to the CompactPCI (cPCI) bus.
    Select options
  • Compare

    AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O

    • Two IP module slots
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.  
    Select options
  • Compare

    AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O

    • Two IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8635A is a non-intelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.
    Select options
  • Compare

    ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules

    • Front I/O access
    • Two isolated I/O expansion slots (AcroPack® or mPCIe)
    The ACPS3310 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules

    • Rear I/O access
    • Two I/O expansion slots (AcroPack or mPCIe)
    The ACPS3320 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    AP220: 12-Bit DAC Module

    • 12-bit DAC
    • 16 channels voltage outputs
    • Extended temperature range
    • PCIe bus interface
    The AP220 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP220.  
    Select options
  • Compare

    AP225: 12-Bit D/A Converter Voltage Waveform Output Module

    • 12-bit DAC
    • 16 channels voltage outputs
    • Wide temperature range
    • PCIe bus interface
    The AP225 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP225 is ideal for waveform generation application that require high speed capabilities. Click here to watch a short video highlighting the features of the Acromag AP225.
    Select options
  • Compare

    AP226: 12-bit DAC Module

    • 12-bit DAC
    • 8 channels voltage output
    • Isolated analog voltage output
    • Extended temperature range
    • PCIe bus interface
    The AP226 outputs analog voltage signals to drive up to 8 devices. When used with a carrier that holds four AcroPack modules, up to 32 voltage outputs can be obtained from a single card cage slot.
    Select options
  • Compare

    AP231: 16-Bit DAC Module

    • 16-bit DAC
    • 16 channel voltage output
    • Wide temperature range
    • PCIe bus interface
    The AP231 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack® modules, up to 32 voltage outputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP231.
    Select options
  • Compare

    AP235: 16-Bit DAC Voltage Waveform Output Module

    • 16-bit DAC
    • 16 channels voltage output
    • Waveform memory
    • Extended temperature range
    • PCIe bus interface
    The AP235 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP235 is ideal for waveform generation application that require high speed capabilities. Click here to watch a short video highlighting the features of the Acromag AP235.
    Select options
  • Compare

    AP236: Isolated 16-bit DAC Module

    • 16-bit DAC
    • 8 channels voltage output
    • Isolated analog voltage output
    • PCIe bus interface
    The AP236 outputs analog voltage signals to drive up to 8 devices. When used with a carrier that holds four AcroPack modules, up to 32 voltage outputs can be obtained from a single card cage slot.
    Select options
  • Compare

    AP323: 16-Bit ADC High Density Analog Input Module

    • 16-bit ADC
    • 20 differential or 40 single-ended channels
    • Wide temperature range
    • PCIe bus interface
    The AP323 AcroPack model monitors 20 differential or 40 single-ended input channels. When used with a carrier that holds four AP modules, up to 160 inputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP323.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems