Showing 1–16 of 22 results
-
AVME9660A: VMEbus 6U Carrier
- Non-intelligent VME IP carrier
- Holds four IP modules
- 50-pin front panel header connectors
- Supports two interrupt channels per IP
- Standard IP module interface
-
5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver
Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452. -
5028-455: 1000BASE-T Copper SFP Transceiver
Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455. -
5028-626 Breakout Panel
- Breakout panel for APZU series.
- I/O breakout panel with cables for Ethernet, UART, JTAG, and 68-pin carrier card connections.
-
AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card
- Four IP module slots
- Rear access I/O
- Plug-and-play carrier configuration and interrupt support
-
AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O
- Two IP module slots
- Front access I/O
- Plug-and-play carrier configuration and interrupt support
-
AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O
- Two IP module slots
- Rear access I/O
- Plug-and-play carrier configuration and interrupt support
-
AP-CC-01: Conduction-Cool Kit
- Required for conduction-cooled applications using an AcroPack
-
APC8620A: Non-intelligent PCI Bus Carrier for IP Modules
- Holds five IP modules
- Front access I/O
- Plug-and-play carrier configuration and interrupt support
-
APC8621A: Non-intelligent PCI Bus Carrier, Half-Length
- Nonintelligent PCI bus carrier
- Holds three IP modules
- Plug-and-play carrier configuration and interrupt support
- Two interrupt channels per IP module
- Supervisory circuit reset generation
-
APCe8650: Non-intelligent PCI Express Bus Carrier
- Non-intelligent PCIe bus carrier
- Holds four IP modules
- Plug-and-play carrier configuration and interrupt (MSI and INTA#) support
- Two interrupt channels per IP module
- Supervisory circuit reset generation
-
AVME9668: VMEbus 6U Carrier
- Non-intelligent VME IP carrier
- Holds four IP modules
- Front panel SCSI-2 connectors
- Supports 8MHz and 32MHz IP clocks
- Supports two interrupt channels per IP
-
AVME967xA: VME64 Carriers with Optional Geographical Addressing
- Non-intelligent VME64x IP carrier
- Holds two or four IP modules
- VME64 high-density rear connectors
- Geographical or user-defined addressing
-
IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)
- Up to 48 TTL or 24 differential RS485
- Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
-
IP480: Counter/Timer Module
- Two or six 16-bit (one or three 32-bit) counter/timer channels
- Event counter
- Output waveform generator
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
- Interrupt support
Embedded I/O Processing Solutions
Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.
Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.
Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.