The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 19 results

  • Compare

    AVME9660A: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • 50-pin front panel header connectors
    • Supports two interrupt channels per IP
    • Standard IP module interface
    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus.
    Select options
  • Compare

    5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver

    Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452.
    Select options
  • Compare

    5028-455: 1000BASE-T Copper SFP Transceiver

    Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455.
    Select options
  • Compare

    5028-626 Breakout Panel

    • Breakout panel for APZU series.
    • I/O breakout panel with cables for Ethernet, UART, JTAG, and 68-pin carrier card connections.
    Select options
  • Compare

    ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules

    • Front I/O access
    • Two isolated I/O expansion slots (AcroPack® or mPCIe)
    The ACPS3310 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules

    • Rear I/O access
    • Two I/O expansion slots (AcroPack or mPCIe)
    The ACPS3320 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    AP-CC-01: Conduction-Cool Kit

    • Required for conduction-cooled applications using an AcroPack
    Select options
  • Compare

    APC330: PCI Analog Input Board

    • 16D/32SE channels (±5V, ±10V, 0-5V, and 0-10V input ranges)
    • 16-bit A/D converter
    • 8µS conversion time (125KHz)
    APC330 boards provide fast, high resolution A/D conversion.
    Select options
  • Compare

    AVME9668: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • Front panel SCSI-2 connectors
    • Supports 8MHz and 32MHz IP clocks
    • Supports two interrupt channels per IP
    Consult factory for long-term availability. The AVME9668 is a non-intelligent slave board that interfaces IP modules to the VMEbus.
    Select options
  • Compare

    AVME967xA: VME64 Carriers with Optional Geographical Addressing

    • Non-intelligent VME64x IP carrier
    • Holds two or four IP modules
    • VME64 high-density rear connectors
    • Geographical or user-defined addressing
    The AVME9670A and AVME9675A are non-intelligent slave boards that interface up to four IP modules to the VMEbus.
    Select options
  • Compare

    Embedded Cables

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    Select options
  • Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options
  • Compare

    PMC520: Serial Communication, 232 Octal

    • 8 asynchronous EIA/TIA-232E serial ports
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 120Kbps)
    These modules provide eight asynchronous serial communication ports from a single PMC Socket.  
    Select options
  • Compare

    PMC521: PMC Serial Communication, 422/485 Octal Module

    • 8 asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 1.8432Mbps)
    These modules provide eight asynchronous serial communication ports from a single PMC Socket.
    Select options
  • Compare

    TAPCABLE1M: SFP+ Direct Attach Cable: SFP+ Cable, SFP+-to-SFP+ (Male-Male) Connectors

    Acromag offers a 1 meter cable that connects one SFP+ port to another SFP+ port. This cable supports speeds up to 10 Gbps. The Acromag part number is TAPCABLE1M.
    Select options
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems