Showing 1–16 of 19 results
-
5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver
Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452. -
5028-455: 1000BASE-T Copper SFP Transceiver
Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455. -
5028-626 Breakout Panel
- Breakout panel for APZU series.
- I/O breakout panel with cables for Ethernet, UART, JTAG, and 68-pin carrier card connections.
-
ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules
- Front I/O access
- Two isolated I/O expansion slots (AcroPack® or mPCIe)
-
ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules
- Rear I/O access
- Two I/O expansion slots (AcroPack or mPCIe)
-
AP-CC-01: Conduction-Cool Kit
- Required for conduction-cooled applications using an AcroPack
-
APC424: PCI Digital I/O (differential & TTL) and Counter/Timers
- 40 I/O channels: 24 differential and 16 TTL
- Four 16-bit or two 32-bit counter/timers
-
APC464: PCI Digital I/O (TTL) and Counter/Timers
- 64 TTL digital input/output channels
- Four 16-bit or two 32-bit counter/timer channels
- Six operating modes
- TTL-compatible thresholds
-
IP480: Counter/Timer Module
- Two or six 16-bit (one or three 32-bit) counter/timer channels
- Event counter
- Output waveform generator
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
- Interrupt support
-
PMC408: Digital Input/Output Module, High Voltage I/O
Consult factory for long-term availability.- 32 bi-directional digital inputs and/or outputs
- 0-60V DC input and output range
- Low-side output switches
- Outputs sink up to 1A per channel
- Change-of-state and level interrupts (up to 8 channels)
-
PMC424: Digital Input/Output Module, Differential, TTL, Counter/Timer
- 24 differential I/O, 16 TTL I/O
- Four 16-bit counter/timer channels, six operating modes
- Change of state and level interrupts
-
PMC464: Digital I/O Module, Counter/Timer
Consult factory for long-term availability.- 64 TTL bi-directional I/O
- Four 16-bit counter/timer channels with six operating modes
- Change of state and level interrupts
-
PMC520: Serial Communication, 232 Octal
- 8 asynchronous EIA/TIA-232E serial ports
- 64-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 120Kbps)
-
PMC521: PMC Serial Communication, 422/485 Octal Module
- 8 asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
- 64-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 1.8432Mbps)
-
TAPCABLE1M: SFP+ Direct Attach Cable: SFP+ Cable, SFP+-to-SFP+ (Male-Male) Connectors
Acromag offers a 1 meter cable that connects one SFP+ port to another SFP+ port. This cable supports speeds up to 10 Gbps. The Acromag part number is TAPCABLE1M.
Embedded I/O Processing Solutions
Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.
Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.
Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.