The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 20 results

  • Compare

    IP500A: Serial Communication, 232 Industry Pack Module

    • Four asynchronous EIA/TIA-232E serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 128Kbps)
    Select options
  • Compare

    IP560: CAN Bus Interface Industry Pack Modules

    • Two CAN bus channels with optional isolation
    • NXP SJA1000 CAN controller with TJA1043 transceiver
    Select options
  • Compare

    IP570: MIL-STD-1553 Bus Interface Modules

    • One or two 1553 interface channels
    • DDC Micro-ACE controls 1553 interface
    Select options
  • Compare

    5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver

    Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452.
    Select options
  • Compare

    5028-455: 1000BASE-T Copper SFP Transceiver

    Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455.
    Select options
  • Compare

    5028-626 Breakout Panel

    • Breakout panel for APZU series.
    • I/O breakout panel with cables for Ethernet, UART, JTAG, and 68-pin carrier card connections.
    Select options
  • Compare

    AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card

    • Four IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8625A is a nonintelligent slave board that interfaces four IP modules to the CompactPCI (cPCI) bus.
    Select options
  • Compare

    AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O

    • Two IP module slots
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.  
    Select options
  • Compare

    AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O

    • Two IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8635A is a non-intelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.
    Select options
  • Compare

    AP-CC-01: Conduction-Cool Kit

    • Required for conduction-cooled applications using an AcroPack
    Select options
  • Compare

    Embedded Cables

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    Select options
  • Compare

    IP501: Serial Communication, 422/485 Full Duplex Industry Pack Module

    End of Life. Consult factory for alternative solutions.
    • Four asynchronous EIA/TIA-422B (EIA-485) serial ports
    • FIFO buffers (16 or 64-byte)
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Select options
  • Compare

    IP502: Serial Communication, 485 Half-Duplex Industry Pack Modules

    • Four asynchronous EIA-485 serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP511: Serial Communication, 422 Isolated Industry Pack Module

    • Four asynchronous EIA/TIA-422B isolated serial ports
    • 16 or 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP512: Serial Communication, 485 Isolated Industry Pack Module

    • Four asynchronous EIA-485 isolated serial ports
    • 16 or 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP520: Serial Communication, 232 Octal Industry Pack Module

    • Eight asynchronous EIA/TIA-232E serial ports
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 230Kbps)
    Consult factory for long-term availability.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems