Showing 1–16 of 24 results
-
IP500A: Serial Communication, 232 Industry Pack Module
- Four asynchronous EIA/TIA-232E serial ports
- 16-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 128Kbps)
-
IP560: CAN Bus Interface Industry Pack Modules
- Two CAN bus channels with optional isolation
- NXP SJA1000 CAN controller with TJA1043 transceiver
-
IP570: MIL-STD-1553 Bus Interface Modules
- One or two 1553 interface channels
- DDC Micro-ACE controls 1553 interface
-
5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver
Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452. -
5028-455: 1000BASE-T Copper SFP Transceiver
Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455. -
5028-626 Breakout Panel
- Breakout panel for APZU series.
- I/O breakout panel with cables for Ethernet, UART, JTAG, and 68-pin carrier card connections.
-
ACEX-4600-EDK: Engineering Design Kit
The ACEX-4600-EDK is an engineering development kit to be used with the ACEX-4620/ACEX-4610 Type 6 COM Express Carrier boards. It provides access to all Type 6 COM Express peripherals via industry standard connectors. -
AP-CC-01: Conduction-Cool Kit
- Required for conduction-cooled applications using an AcroPack
-
Fans & Cooling
- Fans for use in air-cooled applications
- Conduction-cooled kits
- Heatsinks
-
IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)
- Up to 48 TTL or 24 differential RS485
- Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
-
IP480: Counter/Timer Module
- Two or six 16-bit (one or three 32-bit) counter/timer channels
- Event counter
- Output waveform generator
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
- Interrupt support
-
IP501: Serial Communication, 422/485 Full Duplex Industry Pack Module
End of Life. Consult factory for alternative solutions.- Four asynchronous EIA/TIA-422B (EIA-485) serial ports
- FIFO buffers (16 or 64-byte)
- Interrupt support
- Programmable baud rate (up to 512Kbps)
-
IP502: Serial Communication, 485 Half-Duplex Industry Pack Modules
- Four asynchronous EIA-485 serial ports
- 16-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 512Kbps)
-
IP511: Serial Communication, 422 Isolated Industry Pack Module
- Four asynchronous EIA/TIA-422B isolated serial ports
- 16 or 64-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 512Kbps)
Embedded I/O Processing Solutions
Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.
Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.
Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.