Showing 1–16 of 19 results
-
5028-452: 2.125 Gb/s Short-Wavelength SFP Transceiver
Acromag provides 2.125 Gb/s Short Wavelength SFP Transceiver that is compatible with the Gigabit Ethernet standard as specified in IEEE Std 802.3 and Fibre Channel FC-PI-2 Rev. 5.0. It is RoHS compliant and lead-free. The Acromag part number is 5028-452. -
5028-455: 1000BASE-T Copper SFP Transceiver
Acromag offers a SFP Transceiver that is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. It is RoHS compliant and lead-free. The Acromag part number is 5028-455. -
5028-626 Breakout Panel
- Breakout panel for APZU series.
- I/O breakout panel with cables for Ethernet, UART, JTAG, and 68-pin carrier card connections.
-
AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card
- Four IP module slots
- Rear access I/O
- Plug-and-play carrier configuration and interrupt support
-
AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O
- Two IP module slots
- Front access I/O
- Plug-and-play carrier configuration and interrupt support
-
AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O
- Two IP module slots
- Rear access I/O
- Plug-and-play carrier configuration and interrupt support
-
AP-CC-01: Conduction-Cool Kit
- Required for conduction-cooled applications using an AcroPack
-
APC482: PCI Counter/Timer with Quadrature
- Ten 16-bit counter/timers, TTL
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
APC483: PCI Counter/Timer with Quadrature Board
- Four 16-bit TTL counters and four 32-bit RS422 counters
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
APC484: PCI Counter/Timer with Quadrature Board
- Six 32-bit counters - RS422
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
IP480: Counter/Timer Module
- Two or six 16-bit (one or three 32-bit) counter/timer channels
- Event counter
- Output waveform generator
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
- Interrupt support
-
PMC230A: 16-Bit D/A Analog Output
- Independent D/A converters on each channel
- 10µS settling time
- Three output ranges
-
PMC330: Analog Input Module, 16-bit A/D
- 16 differential or 32 single-ended inputs
- 125KHz throughput
- 8µS/conversion
- Selectable input range (±5V, ±10V, 0-5V, 0-10V)
-
PMC341: Analog Input Module, Simultaneous Sample & Hold
- 16 differential inputs (two 8-channel groups)
- Eight 14-bit A/D
- 125KHz throughput
- 8µS conversion time for 8-channel group
- 512 sample FIFO buffer
- ±10V input range
-
TAPCABLE1M: SFP+ Direct Attach Cable: SFP+ Cable, SFP+-to-SFP+ (Male-Male) Connectors
Acromag offers a 1 meter cable that connects one SFP+ port to another SFP+ port. This cable supports speeds up to 10 Gbps. The Acromag part number is TAPCABLE1M.
Embedded I/O Processing Solutions
Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.
Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.
Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.