XT1120: 16-Channel Discrete Ethernet I/O Modules
with Sourcing Outputs
XT1121: Modbus/TCP and i2o protocol
XT1122: Ethernet/IP protocol
XT1123: Profinet protocol
The XT1120 interfaces discrete I/O signals between measurement and control devices over Ethernet. Channels are individually configurable for input or high-side switched output operation.
Rugged construction, high density design, and easy USB-to-PC/Windows setup combine for a very effective I/O solution. These units are ideal for remote monitoring, distributed control, or SCADA applications.
Input: 0-32V DC, TTL thresholds
Output: 0-32V DC, open-drain, up to 300mA
Modbus TCP/IP, Ethernet/IP, Profinet, i2o® peer-to-peer, 10/100Base-T(X) PriorityChannel™ device determinism
12 to 32V DC (2.5W)
IMPORTANT: To prevent damage or errors from grounded PCs and surges, Acromag strongly recommends use of the USB-ISOLATOR when configuring an XT1000 I/O module.
USB Connector Type: USB Mini-B type socket, 5-pin.
USB Connector Data rate: 12Mbps. USB v1.1 and 2.0 compatible.
USB Connector Maximum cable length: 5.0 meters.
USB Transient Protection: Transient voltage suppression on power and data lines.
Driver: Not required. Uses Windows HID drivers.
Input Type: 16 active-high, buffered inputs, with a common connection. Inputs are tied in tandem to output drains for optional loopback monitoring of output state.
Input Signal Voltage Range: 0 to 32V DC.
Input Current: 280μA, typical at 32V DC.
Input Signal Threshold: 1.7V typical with100mV of hysteresis.
Input Resistance: 100K ohms, typical.
Input Response Time: 10ms, nominal.
Output Type: 16 open-source, smart, p-channel mosfet switches with a common drain connection. Provides high-side (sourcing) switching between excitation and load.
Output Voltage: 0 to 32V DC.
Output “ON” Resistance: 0.8 ohms typical, 1.6 ohms maximum.
Output “ON” Current Range: 0 to 300mA DC, continuous (up to 4.8A total for all 16 channels combined). See Operating Temperature specification for effect of channels at full load. See manual for detailed effects of operating temperature.
Output Response Time: 10ms, nominal.
Protocols: Modbus TCP/IP, i2o peer-to-peer, Ethernet/IP, or Profinet depending on model number.
Ethernet Communication Controller: Innovasic RapID™ Platform with PriorityChannel™ for determinism at the device regardless of network load.
Modbus TCP/IP (slave): Port 502 reserved. Supports up to 10 sockets.
i2o Peer-to-Peer (master/slave): Can map 4-channel input groups to output groups at two destination IP addresses. Timed or change-of-state updates. Supports GPRS/GSM systems.
Ethernet/IP (adapter): Supports 16 connections. EDS file on website.
Profinet (server): Supports 1 connection. GSDML file on website.
Connectors: Two shielded 8-pin RJ-45 sockets, 10BaseT/100BaseTX.
Wiring: Auto-crossover for MDI or MDI-X.
IP Address: User-configurable. 22.214.171.124 default static IP address.
Data Rate: Auto-negotiated, 10Mbps or 100Mbps.
Compliance: IEEE 802.3, 802.3u, 802.3x.
Operating temperature: -40 to 70°C (-40 to 158°F). Max temperature derates -0.625°C per output channel at full load (300mA).
Storage temperature: -40 to 85°C (-40 to 185°F).
Relative humidity: 5 to 95% non-condensing.
Power Requirement: 12 to 32V DC (95mA maximum @ 24V).
Isolation: 4-way isolation between I/O channels, network (each port); and power.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC.
Vibration: 4g, per IEC 60068-2-64.
Shock: 25g, per IEC 60068-2-27.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
CE compliant. UL/cUL Class I; Div. 2 Zone 2. ATEX cert. II 3 G Ex nA IIC T4 Gc -40°C < Ta < +80°C
General: General purpose plastic enclosure for mounting on 35mm “T-type” DIN rail.
Case Material: Self-extinguishing polyamide, UL94 V-0 rated, color light gray. General purpose NEMA Type 1 enclosure.
Circuit Board: Military grade fire-retardant epoxy glass (IPC-4101/98).
I/O Connectors: Removable plug-in type terminal blocks rated for 12A/250V; AWG #26-12, stranded/solid copper wire.
Dimensions: Width = 22.5mm (0.9 inches), Length = 114.5mm (4.51 inches), Depth = 99.0mm (3.90 inches).
Shipping Weight: 0.5 pounds (0.22 Kg) packed.
Features & Benefits
- 16 solid-state discrete I/O channels (any mix of inputs or outputs)
- Built-in 10K ohm pull-up resistors for 2/3-wire sensors (contacts, proximity, TTL)
- Configurable normal/reverse input logic
- Open-drain outputs switch up to 300mA each and include built-in read-back capability
- Easy setup with Windows software via USB
- Watchdog timer control of failsafe outputs
- Continuously changing “heart-beat” register validates module operation
- High-Density 22.5mm wide package with pluggable, front-facing terminals
- Dual Ethernet 10/100 ports (auto-negotiation) reduce switch port requirements
- 1500V AC isolation (between I/O, power, and network ports) and surge/transient protection
- Supports bussed/rail and redundant power
- -40°C to +70°C wide temperature operation
- Withstands 25g shock and 4g vibration
- CE and UL/cUL Class 1 Div 2 Zone 2 approvals.
- ATEX Certified.