Intelligent Alarm, Dual RTD Input
- 2 input channels, RTD (Pt, Ni, Cu) input
- Dual mechanical relay outputs
- 10-36V DC power
- Software configured; multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection); on/off controller capability
IntelliPack alarms compare inputs against userdefined limit setpoints to control built-in relays.
Each unit offers a selection of input ranges and alarm functions to handle a broad range of applications. As your needs change, you can easily reconfigure the unit for different ranges or functions. Alarm functions available on all models include on/off controller, limit alarm, window alarm, deviation alarm, rate-of-change alarm, and peak/valley detection.
Setup is very easy. IntelliPack alarms are configured through a user-friendly Windows XP/Vista/7 program. Field adjustments and recalibration are quickly performed with front-panel push-buttons and status LEDs. Once configured, IntelliPacks operate independent of any host computer.
Analog to Digital (A/D) Converter: 16-bit S-D A/D converter.
Resolution: 0.1°C/ LSB. ADC typically yields resolutions finer than 0.1°C/LSB.
Ambient Temperature Effect: Better than ±0.005% of input span per °C or ±1μV, whichever is greater.
Normal Mode: Better than 40dB @ 60Hz.
Common Mode: Better than 130dB @ 60Hz.
Input Filter: Normal mode filtering, plus digital filtering optimized and fixed per input range within S-D ADC.
Input Response Time: Less than 300mS to 98% of final value for a step change in the input. A software programmable delay can be implemented for filtering transients.
Relay Time Delay: Adjustable alarm delay of up to 25 seconds.
Input Overvoltage Protection: Bipolar Transient Voltage Suppressors (TVS).
Resistance Input Range: 0 to 500 ohms.
Resistance Accuracy: ±0.05 ohms.
RTD Input Ranges: 100 ohm Platinum, 120 ohm Nickel, or 10 ohm Copper; user-configured.
|RTD||°C Range (°F Range)||Accuracy|
|Pt1||-200 to 850°C (-328 to 1562°F)||±0.25°C|
|Pt2||-200 to 850°C (-328 to 1562°F)||±0.25°C|
|Ni||-80 to 320°C (-112 to 608°F)||±0.25°C|
|Cu||-200 to 260°C (-328 to 500°F)||±1.00°C|
Alpha: Pt1 (a = 1.3850), Pt2 (a = 1.3911), Ni (a = 1.6720), Cu (a = 1.4272).
2, 3, or 4-wire configurations supported. Module provides sensor excitation, linearization, lead-wire compensation, and sensor break detection.
RTD Excitation Current: 1mA DC typical, all types.
RTD Lead-Wire Compensation: 25 ohms per lead.
RTD Break Detection: RTD sensor failure can be configured for either upscale or downscale.
Relays: Two independent SPDT electro-mechanical relays. Contact material Silver-Cadmium Oxide (AgCdO).
Relay Ratings (CSA ratings): 25V DC @ 5A. 120/240V AC @ 5A.
Expected Mechanical Life: 20 million operations.
Operating: -25 to 70°C (-13 to 158°F).
Storage: -40 to 85°C (-40 to 185°F).
Relative Humidity: 5 to 95%.
Power Requirements: 10 to 36V DC. 55mA @ 24V. 80mA @ 15V.
Isolation: 3-way (input/output/power). 1500V AC for 60 seconds or 250V AC continuous. Inputs share a common.
Radiated Field Immunity (RFI): EN61000-4-3, EN50082-1.
Electromagnetic Field Immunity (EMI): No relay trips will occur beyond ±0.25% of input span from setpoint under the influence of electromagnetic fields from switching solenoids, commutator motors, and drill motors.
Electrical Fast Transient (EFT): EN61000-4-4, EN50082-1.
Surge Withstanding Capability (SWC): EN61000-4-5, EN50082-1.
Electrostatic Discharge (ESD): EN61000-4-2, EN50082-1.
Radiated Emissions: EN50081-1 for Class B equipment.
Approvals: UL, cUL listed (USA, Canada). UL3121 - general product safety.
Software Configuration: Units are fully programmable via the Windows XP/Vista/7 IntelliPack Configuration Program. Configuration downloads from PC through EIA232 serial port using Acromag 800C-SIP kit.
Field Configuration: Setpoint and deadband are configurable via push-buttons and a standard calibrator.
LED Indicators: LEDs indicate power, status, and alarm.
Enclosure Case: Self-extinguishing NYLON type 6.6 polyamide thermoplastic UL94 V-2, color beige; general purpose NEMA Type 1 enclosure.
Connectors (Removable terminal blocks) Wire Range: AWG #14-22 (AWG #12 stranded only).
Printed Circuit Boards: Military grade FR-4 epoxy glass circuit board.
Dimensions: 1.05W x 4.68H x 4.35D inches. 26.7W x 118.9H x 110.5D millimeters.
Shipping Weight: 1 pound (0.45 Kg) packed.
Features & Benefits
- Integrated microcontroller performs intelligent signal processing for advanced alarm functions.
- Windows XP/Vista/7 software configuration speeds setup and replacement.
- Push-button reprogrammability facilitates changes in the field without a host PC.
- Multi-purpose inputs accept numerous ranges to reduce spare stock requirements.
- High-resolution Sigma-Delta A/D converter delivers high accuracy with low noise.
- Input excitation supply on each input provides power for a two-wire transmitter.
- Dual alarm operation lets you perform two alarm functions at the same time.