uB31 / uB41
uB31/41: DC Voltage Field Input Module
• Field Input: ±1V to ±60V ranges
• Host Output: 0-5V or ±5V ranges
The uB30 and uB40 models condition and convert a low-level DC voltage field input signal to a scaled 0-5V or ±5V output. The uB30 has more filtering for low-band applications, while the uB40 relaxes filtering for higher speed applications. uB30 modules are recommended for noisier environments where conversion speed is less of a concern. uB40 modules drive a faster response, but with less filtering for noise.more >
Acromag’s microBlox® uB Series I/O modules offer a compact, high-performance solution for interfacing sensors and field devices with data acquisition systems. uB signal conditioning modules are ideal to isolate, filter, convert and amplify a wide variety of signal types for test, measurement and control systems. Just plug uB modules into 4, 8, or 16-channel backpanels in any mix for a high-density analog I/O interface. Channel-to-channel isolation provides optimal noise and surge protection from ground loops, spikes, and high common mode voltages.
The uBTA carriers are used with Acromag’s microBlox® signal conditioning modules to create powerful alarms that also provide a voltage/current transmitter output. The plug-in modules offer the convenience of wireless field programming on a smartphone or tablet.
Bluetooth® wireless technology versions enable configuration using a smart phone or tablet. Acromag’s Agility™ app, available for Android™ and iOS® mobile devices, helps you vary input/ output ranges and scaling to your specific application. The Agility app can also set an alarm output function with a setpoint limit and deadband. Other app functions include polling inputs, trending values in a sharable chart, updating calibration, and diagnostic troubleshooting.
For cost-sensitive projects, a commercial-grade version is available (-CG models). These units offer similar performance, but over a limited temperature range and lack hazloc approvals.
Backpanels provide power, I/O wiring terminals, and host access to an industry-standard analog signal bus. Modules are hot-swappable without screws. Data acquisition boards can access all host I/O signals on the DB25 bus connector.
Agility™ Config Tool is available for free.
Fixed ranges: ±1V to ±60V. User-configurable -B models: DC ranges up to ±60V.
16-bit ADC ±1V: 1/27395. ±5V/±10V/±20V: 1/34244. ±40V/±60: 1/51366.
Resistance: 203.32KΩ (via resistive input divider x0.0163).
Input Sample Rate
uB31: 40sps. uB41: 2000sps.
Normal Mode (Bandwidth)
uB31: -3dB at 4Hz. uB41: -3dB at 1KHz.
Common Mode Rejection: 103dB typical, 50-60Hz.
Fixed ranges: 0-5V or ±5V DC. User-configurable -B models: ±5V.
16-bit DAC, 0-5V: 1/26305. ±5VDC: 1/52610.
Current Drive: 5V into 1KΩ minimum or 5mA max.
uB31: Output Step 0-98% in 200ms. uB41: Output step 0-98% in 2ms.
Power Consumption: Up to 0.25W, or 50mA max. from 5V.
Effective resolution is the least of input (A/D) and output (D/A) resolution. uBx1-01/-04: 1/27395. uBx1-02/-03: 1/34244. uBx1-04/-05/-06: 1/26305. uBx1-07: 1/34244. uBx1-08/-10/-13: 1/26305. uBx1-09/-12: 1/51366.
Better than ±0.1%. 0.05% typical. -CG models: Better than ±0.125%. 0.075% typical.
Non-Linearity: Better than ±0.05%, typical.
Noise: Less than 0.03% of 10V span p-p rms.
Ambient Effect: Less than ±80ppm/°C.
Height: 1.380” with connectors, 0.970” without. Width: 0.425”. Length: 1.425”.
-40 to 80°C (-40° to 176°F). -CG models: 0 to 55°C (32 to 131°F).
Storage Temperature: -40 to 85°C (-40° to 185°F).
Relative Humidity: 0 to 95% non-condensing.
Power Requirement: 5V powered.10-32V power optional (requires uBDC-1 power module & backpanel.)
Safety Isolation: Field channels are individually isolated field channel-to-field channel and from the field to the host I/O bus (host group includes 5V power) for commonmode voltages up to 250V AC, or 354V DC off DC power ground, on a continuous basis (will withstand 1500VAC HIPOT/dielectric strength test for one minute without breakdown). This complies with test requirements of ANSI/ISA-82.01-1988 for voltage rating specified.
Shock and Vibration Immunity Conforms to:
IEC 60068-2-6: 10-500 Hz, 4G, 2 hours/axis, for sinusoidal vibration. IEC 60068-2-64: 10-500 Hz, 4G-rms, 2 hours/axis , for random vibration. EC 60068-2-27: 25G, 11ms half-sine, 18 shocks at 6 orientations, for mechanical shock.
Electromagnetic Compatibility (EMC) Compliance
Minimum immunity per BS EN 61000-6-1 (2007): CE marked, per EMC Directive 2004/108/EC. Electrostatic Discharge Immunity (ESD), per IEC 61000-4-2. Radiated Field Immunity (RFI), per IEC 61000-4-4. Electrical Fast Transient Immunity (EFT), per IEC 61000-4-4. Surge Immunity, per IEC 61000-4-5. Conducted RF Immunity (CRFI), per IEC 61000-4-6.
Class B product with emissions per BS EN 61000-6-3 (2007+A1:2011): enclosure port, per CISPR 16. Low voltage AC mains port, per CISPR 16.
Approvals: CE compliant. RoHS Compliant. UL/cUL Class 1, Division 2, Groups ABCD. ATEX Zone 2. No UL or ATEX on -CG models.
Features & Benefits
- Wide variety of input and output ranges
- Mixes with different I/O types on compact 4, 8, or 16 channel backpanels
- Select fixed I/O range models or Bluetooth wireless technology user-configurable models
- Cost-saving commercial-grade versions available for less demanding applications
- Android® and iOS® apps simplify wireless configuration with a smartphone or tablet
- Mobile app configures I/O ranges, sets scaling, calibrates and performs diagnostics
- Optional alarm function with setpoint and deadband control driving 0/5V host output
- Poll and trend I/O values to sharable charts
- High accuracy, noise immunity, and stability
- Isolated field-to-host and channel-to-channel (1500Vac peak, 250Vac/354Vdc continuous)
- Over-molded I/O circuits offer superior shock, vibration, moisture, and dust protection.
- Wide operating temperature range
- UL/cUL Class I, Div 2, ABCD and ATEX Zone 2 hazardous location approvals
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Acromag is under license other trademarks are property of their respective owners.