Signal Conditioning & Network I/O
How to Distribute Critical Signals Simultaneously to Multiple Locations
An Acromag Solutions Video Application Note A satellite launch company needs to send a discrete abort signal to multiple locations at the same time if anything gets out of specification. The equipment to monitor and control the launch are in several different buildings but all on the same network. Click here to download How to…
How to Control a Remote Pump for a Natural Gas Pipeline
An Acromag Solutions Video Application Note A natural gas pipeline has a remote pumping station a mile away and they need to be able to adjust the pumping rate without driving to the site. The pump is controlled by a variable frequency drive. Running control wire is too expensive and also undesirable due to potential…
How to Display and Maintain Tank Levels in Hazardous Areas
An Acromag Solutions Video Application Note A chemical manufacturer has various tanks of substances which it combines to manufacture their product. The tops of these tanks are UL rated Class 1 Division 2 hazardous areas. Their sensors are four-wire, non-contact level. In addition, they want their operators to be able to read and adjust the…
How to Use Wireless Remote I/O Cost-Effectively
An Acromag Solutions Video Application Note A wastewater treatment facility needs a cost-effective wireless remote I/O solution to bring measurements for water level, turbidity, PH, temperature, and phosphates back to their SCADA control room. The SCADA system can accept analog and discrete inputs as well as Modbus® RTU and Modbus TCP/IP. They have sensors for these…
How to Measure Temperature with High-density Ethernet I/O
An Acromag Solutions Video Application Note Along with monitoring points for pressure, level, and flow, a chemical manufacturer has up to 500 temperature measurement points; both thermocouple and RTD, scattered throughout their process. Running and maintaining twisted pair wire for them all is too expensive; both initially and in the long term, therefore an ethernet…
Ethernet Expandable Remote I/O: BusWorks NT Video
New BusWorks® NT series remote Ethernet I/O modules interface 16 analog or discrete I/O channels and feature an I/O expansion bus linking up to three additional I/O modules! AcroMaggie gives a brief overview of Acromag’s BusWorks NT Ethernet expandable remote I/O modules in the video below. NTE Ethernet I/O models have dual RJ45 ports and…
Remote Expandable Ethernet I/O: BusWorks NT Introduction
Introducing the New BusWorks® NT Series Remote Ethernet I/O Modules Acromag’s new BusWorks NT Series of remote I/O modules provide an Ethernet interface for analog, discrete and temperature signals. NTE Ethernet I/O models have dual RJ45 ports and a webserver with Modbus TCP/IP communication to monitor or control the internal I/O channels. An integrated DIN rail…
Single/Dual-Channel Isolated Transmitters and Signal Splitters Guarantee a Dependable Value
Accomplish more in less time with easy configuration via USB with Windows® software or Agility App™ for Android.
New Ethernet Remote I/O Modules Support I/O Expansion of up to 64 channels with Mix of Signal Types on a Single IP Address
Ethernet modules interface 16 analog or discrete I/O channels and feature an I/O expansion bus linking up to three additional I/O modules. Acromag’s new BusWorks® NT2000 Series remote I/O modules provide an Ethernet interface for analog, discrete and temperature signals. NTE Ethernet I/O models have dual RJ45 ports and a webserver with Modbus TCP/IP communication…
Loop-powered Panel Meters & Isolator/Alarms with Display
Acromag Vertu® Series VPM2000 loop-powered isolators/alarms with display are 1/8 DIN digital panel meters designed for the purpose of convenient and informative displays of any 4-20mA signal. The dual line display shows the process value on the top line and the units or a tag on the bottom line. You can also display the input…