• Configuration Software
• USB-to-RS232 Adapter
• RS232-to-RJ11 Adapter
• Interface Cable

Acromag’s configuration software is the key to the IntelliPack’s easy-to-use operation. The software employs the friendly Windows® interface with pull-down selection menus and fill-in-the-blank fields to speed you through a few brief configuration screens. No programming is required.

• Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt (±100mV DC), resistance (0 to 500 ohms) input
• Single or dual mechanical relay alarm outputs
• 10-36V DC power
• Software configured
• Multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection)
• On/off controller capability

IntelliPack alarms compare inputs against user-defined limit set-points to control built-in relays.

• Thermocouple, RTD, milliVolt, and Resistance Input
• 0 to 20mA DC, 0 to 10V DC output
• Limit Alarm
• 10-36V DC power
• Software configured
• Performs linearization, square root extraction, and optional limit alarm functions

These transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.

• ±100V or 0 to 22mA DC input ranges or 2 input channels, ±100V or 0 to 22mA DC input ranges (AC current with optional sensor)
• Single or dual mechanical relays
• 10-36V DC power
• Software configured; multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection); on/off controller capability

IntelliPack alarms compare inputs against user-defined limit set-points to control built-in relays.  

• ±100V or 0 to 22mA DC input ranges (AC current with optional sensor)
• 0 to 20mA DC, 0 to 10V DC output
• Mechanical relay alarm (25V @ 5A)
• 10-36V DC power
• Software configured, performs linearization, square root extraction, and optional limit alarm functions

These transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.

• 2 input channels, thermocouple (types J, K, T, R, S, E, B, N), or millivolt (±100mV DC) input
• Dual mechanical relays output
• 10-36V DC power
• Software configured; multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection); on/off controller capability

IntelliPack alarms compare inputs against user-defined limit set-points to control built-in relays.

• 0 to 50KHz, 0 to 65535 pulses input
• 0 to 20mA DC, 0 to 10V DC output
• Mechanical alarm relay (25V @ 5A)
• 10-36V DC power
• Software configured; pulse counter; signal averaging; optional limit alarm functions

These transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.

• 2 or 4 input channels, 0 to 20mA DC, 0 to 10V DC (selectable ranges)
• 0 to 20mA DC, 0 to 10V DC (selectable ranges) output
• 10-36V DC power
• Software configured, computes arithmetic operations, evaluates conditional and Boolean arguments, executes track & hold functions

IntelliPack math modules perform complex mathematical computations and convert DC input signals to scaled DC or frequency outputs. They are ideal for isolating and interfacing analog signals to a PLC or controller as a voltage, current, or a pulsed input.

• 0 to 20mA DC, 0 to 10V DC (selectable ranges), 896M 2 channels input
• 0 to 10KHz, 0 to 36,000 counts/hr Frequency output, 896M 2 channels
• Solid-state relay (60V DC @ 500mA) control output
• 10-36V DC power
• Software configured, ideal for integrator/totalizer applications, computes arithmetic operations, conditional arguments, track & hold functions

IntelliPack math modules perform complex mathematical computations and convert DC input signals to scaled DC or frequency outputs.