• 16 differential or 32 single-ended input channels
• 200KHz throughput
• 5µS/conversion
• Selectable input range (±5V, ±10V, 0-5V, 0-10V)

IP330A Industrial I/O Pack (IP) modules provide fast, high-resolution A/D conversion.

• 16 differential inputs (two 8-channel groups)
• 12 or 14-bit A/D
• 125KHz throughput
• 8µS conversion time for 8-channel group
• 512 sample FIFO buffer, ±10V input range

IP340/341 Industrial I/O Pack (IP) modules provide fast, high resolution, simultaneous A/D conversion of up to eight channels.

• 40 input channels
• 0-60V DC input range
• Change-of-state/level interrupts (up to 12 channels)

The IP400 can monitor the on/off (high/low) status of up to 40 devices.

• 40 low-side switch output channels
• 0-60V DC output range
• High output current (up to 1A per channel)

The IP405 controls up to 40 low-side switches (open-drain MOSFETs).    

• 32 bi-directional digital input and/or output channels
• 0-60V DC input and output range
• Low-side output switches
• Outputs sink up to 1A per channel
• Change-of-state and level interrupts (up to 8 channels)

The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.

• 24 differential digital input and/or output channels
• Ruggedized RS-422A/485 transceivers
• Interrupt support on all channels (change-of-state and high or low level transition)

The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination.

• 32 port-isolated input channels
• ±60V AC/DC input (three ranges)
• Interrupt support for each channel

IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.

• 32 port-isolated output channels (bipolar solid state relays)
• ±60V AC/DC output
• High/low-side switch configuration

IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices.

• 48 bi-directional input/output channels
• TTL-compatible inputs
• CMOS-compatible open-drain outputs
• Interrupt support for each channel

IP470A Industrial I/O Pack (IP) modules provide 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices.

• Two or six 16-bit (one or three 32-bit) counter/timer channels
• Event counter
• Output waveform generator
• Pulse-width or periodic rate monitor
• Watchdog timer with isolated relay output
• Interrupt support

Consult factory for long-term availability.    

• Four asynchronous EIA/TIA-422B (EIA-485) serial ports
• FIFO buffers (16, 64, or 128-byte)
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Four asynchronous EIA-485 serial ports
• 16-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Four asynchronous EIA/TIA-422B isolated serial ports
• 16 or 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Four asynchronous EIA-485 isolated serial ports
• 16 or 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Eight asynchronous EIA/TIA-232E serial ports
• 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 230Kbps)

Consult factory for long-term availability.

• Eight asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
• 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 921.6bps)

Consult factory for long-term availability.