• ±100V DC, 0 to 100mA DC, 0 to 20A AC (with optional sensor) input
• 0 to 20mA, 0 to 10V DC output
• 10-36V DC power
• Universal DC I/O transmitters with auto-configuration and self-ranging capabilities

These units receive DC current or voltage input signals, provide isolation, and output proportional DC current or voltage signals. With support for universal DC I/O ranges, 610T series transmitters provide a solution for a wide variety of isolation and signal conversion tasks.

• 4 to 20mA DC input
• 4 to 20mA DC output
• 12-36V DC SELV, 90-250V AC power
• Single or dual I/O with a dual output model and full isolation

These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels. Galvanic isolation eliminates ground loops, reduces noise, and blocks transient signals.

• Single input, dual output (splitter)
• 12-36V DC SELV, 90-250V AC
• Provides two identical outputs from one input signal

These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels. Galvanic isolation eliminates ground loops, reduces noise, and blocks transient signals.

• DC current input
• Single/dual-channel DC-powered isolators

These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels.

• 2 channels, ±625mV, 0-10V DC (selectable ranges) input
• 4 to 20mA DC output
• 12-50V DC power from output loop
• Dual-channel transmitter with push-button calibration

These units accept DC voltage input signals, provide isolation, and output proportional DC current signals.

• TC (types J, K T, R, S, E, B, N), ±1V DC, selectable range/type input
• 4 to 20mA DC output
• 12-50V DC from output loop power
• DIP-switch configuration, signal linearizer, push-button calibration

These units accept universal thermocouple and millivolt input signals, provide isolation, and output proportional DC current signals. The output can also be linearized to the input sensor signal.  

• 100 ohm Pt, 120 ohm Ni, 10 ohm Cu (selectable type) input
• 4 to 20mA DC output
• 12-50V DC from output loop power
• DIP-switch configuration, push-button calibration

These units accept universal RTD or resistance input signals and output proportional DC current signals. The output can also be linearized to the input sensor signal.

• DC current input
• Single, dual, or quad I/O loop-powered isolators

These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Power is derived from the input signal current. Each channel operates independently and is isolated from the others to prevent interaction between channels.

• One 4 to 20mA DC input
• Two 4 to 20mA DC outputs
• 12-50V DC power from output loop
• Signal splitter provides two identical outputs from one input signal

These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels.