How to Measure Temperature with High-density Ethernet I/O

Signal Conditioning & Network I/O

How to Measure Temperature with High-density Ethernet I/O

An Acromag Solutions Video Application Note Along with monitoring points for pressure, level, and flow, a chemical manufacturer has up to 500 temperature measurement points; both thermocouple and RTD, scattered throughout their process. Running and maintaining twisted pair wire for them all is too expensive; both initially and in the long term, therefore an ethernet…

Technical Applications Blog

How to Use Wireless Remote I/O Cost-Effectively – 8401064

An Acromag Solutions Application Note Defining the Problem: A wastewater treatment facility needs a cost-effective wireless remote I/O solution to bring measurements for water level, turbidity, PH, temperature, and phosphates back to their SCADA control room. The SCADA system can accept analog and discrete inputs as well as Modbus® RTU and Modbus TCP/IP. They have…

Embedded I/O & Processing Solutions News,New Products

New XMC FPGA Modules with Write-Protected Configuration Memory for Enhanced Security

Two new XMC modules with a Xilinx Artix-7 or Kintex-7 FPGA feature write-protected flash memory to prevent unwanted changes to configuration files Wixom, MI:  Acromag’s new XMC-7AWP and XMC-7KWP modules, with a user-programmable Xilinx® Artix®-7 or Kintex® FPGA, feature write-protected flash memory to secure the configuration files. These modules are well-suited for a broad range…

Technical Applications Blog

How to Measure Temperature, with a High-Density Ethernet I/O Solution

Acromag Solutions Application Note 8401062 The Problem: Monitoring up to 500 Temperature Measurement Points A chemical manufacturer has up to 500 temperature measurement points. In addition, they’re monitoring points for pressure, level and flow, and have thermocouple and RTD scattered throughout their process. It would be cost prohibitive to run and maintain twisted pair wire for…

Technical Applications Blog

Signal I/O ~ Precisely Speaking

By Mike, Inside Technical Sales Representative Problem: Engineering firm requires bi-polar input of +/-6VDC & output dialing down to a precision value of 0 to 3.30VDC. Acromag makes a wide range of analog signal I/O converter/transmitters. However, while most process, manufacturing and test I/O require standard signals with ranges such as 4-20mA, 0-10VDC, 0-5VDC etc.;…

New Products,Signal Conditioning & Network I/O

New Ethernet Remote I/O Modules Support I/O Expansion of up to 64 channels with Mix of Signal Types on a Single IP Address

Ethernet modules interface 16 analog or discrete I/O channels and feature an I/O expansion bus linking up to three additional I/O modules. Acromag’s new BusWorks® NT2000 Series remote I/O modules provide an Ethernet interface for analog, discrete and temperature signals. NTE Ethernet I/O models have dual RJ45 ports and a webserver with Modbus TCP/IP communication…

Embedded I/O & Processing Solutions News,New Products

Mini PCIe FPGA I/O Modules with Zynq UltraScale+ MPSoC

Mini PCIe FPGA I/O Modules with Zynq UltraScale+ MPSoC for I/O Processing & Programmable Logic: APZU Video Acromag’s AcroPack® APZU mini PCIe FPGA series is the smallest, most economical platform to host a Zynq® UltraScale+™ MPSoC FPGA computing device. Designers can increase overall system performance by leveraging the tightly coupled CPU and FPGA computing engines for different signal…