 |
900EN
Ethernet Switch
PORTS: 5-Ports, 10/100Mbps
POWER: 15 to 36V DC supply required
NETWORK COMMUNICATION: Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX |
951EN / 952EN
Combination I/O: Analog and Discrete I/O with i2o Option
INPUT: DC Current/Voltage or Discrete
OUTPUT: DC Current or Discrete
POWER: 15 to 36V DC
NETWORK COMMUNICATION: EtherNet/IP® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability |
961EN / 962EN
6-Channel Differential Input: DC Current or DC Voltage Signals with i2o Option
INPUT: 6 channels, 0 to 20mA in 3 selectable ranges (0 to 20 amps AC with optinal AC sensor) or ±78mV to ±10V DC with eight range options
POWER: 15 to 36V DC
NETWORK COMMUNICATION: EtherNet/IP® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability |
963EN / 964EN
12-Channel Single-Ended Input: DC Current or DC Voltage Signals
INPUT: 12 channels, 0 to 20mA in 3 selectable ranges (0 to 20 amps AC with optional AC sensor) or ±1V, ±5V, or ±10V DC
POWER: 15 to 36V DC
NETWORK COMMUNICATION: EtherNet/IP® or Ethernet Modbus TCP/IP 10/100Mbps network |
965EN
4 or 6-Channel Input: Thermocouple or Millivolt Signals with i2o Option
INPUT: 4 or 6 channels, thermocouple or DC millivolts (user-selectable)
POWER: 15 to 36V DC
NETWORK COMMUNICATION: EtherNet/IP® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability |
966EN
4 or 6-Channel Input: RTD or Resistance Signals with i2o Option
INPUT: 4 or 6 channels, Platinum 100 ohm, Nickel 120 ohm, Copper 10 ohm; 0 to 500 ohms resistance
POWER: 15 to 36V DC supply required
NETWORK COMMUNICATION: EtherNet/IP® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability |
967EN
8-Channel Input: Differential Analog Current with i2o Option
INPUT: Analog Current
POWER: 18 to 36V DC
NETWORK COMMUNICATION: EtherNet/IP® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability |
968EN
8-Channel Input: Differential Analog Voltage with i2o Option
INPUT: Analog Voltage
POWER: 18 to 36V DC, 2.4W
NETWORK COMMUNICATION: EtherNet/IP® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability |
972EN / 973EN
4 or 6-Channel Output: DC Current or DC Voltage Signals with i2o Option
OUTPUT: 0 to 1mA, 0 to 20mA, or 4 to 20mA DC Current; 0 to 1V, 0 to 5V or 0 to 10V DC
POWER: 15 to 36V DC
NETWORK COMMUNICATION: EtherNet/IP® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability |
981EN / 982EN / 983EN
12-Channel I/O: Active-Low Inputs, Sinking Outputs with i2o Option
INPUT: 12 channels, 0 to 35 DC range
POWER: 15 to 36V DC supply required
NETWORK COMMUNICATION: EtherNet/IP® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability |
989EN
16-Channel I/O with Counter/Timers
INPUT: 0-28V
OUTPUT: 0-28V DC
COUNTER/TIMERS: 8 up/down counters, 32-bit, 200Hz max; 8 timers, 16-bit, 1mS resolution
POWER: 18 to 36V DC
NETWORK COMMUNICATION: Ethernet Modbus TCP/IP 10/100Base-T(X) |
993EN
16-Channel Single-Ended Input: DC Current Signals
INPUT: ±20mA, 0-20mA, 4-20mA DC (selectable on each channel)
POWER: 18 to 36V DC
NETWORK COMMUNICATION: Modbus TCP/IP, 10/100Base-T(X) |
994EN
16-Channel Single-Ended Input: DC Voltage Signals
INPUT: ±5V, ±10V DC (selectable on each channel)
POWER: 18 to 36V DC
NETWORK COMMUNICATION: Modbus TCP/IP, 10/100Base-T(X) |
ESW-MBLIB
Ethernet Modbus C-Library Software |
Ethernet Accessories
Power supplies and DIN rail strips are available from Acromag. |
