New! 2 or 4-Wire USB-Configured Isolators and Transmitters

New! 2 or 4-Wire USB-Configured Isolators and Transmitters

Click here for details

The TT230 and TT330 series of space-saving, 2 or 4-wire transmitters and isolators are offered for a range of inputs with sink/source 4-20mA output compatibility. Using isolation, these transmitters protect from surges, noise, and ground loop errors.

New! USB-Configured High-Density Ethernet I/O

New! USB-Configured High-Density Ethernet I/O

Click here for details

The BusWorks XT series of Ethernet I/O modules support Modbus TCP/IP, Ethernet/IP, Profinet and i2o peer-to-peer communication protocols. They monitor and/or control up to 16 discrete or analog devices per unit with a variety of inputs and outputs supported.

Signal Conditioners & Converters

Acromag signal conditioner products include process transmitters, 4-20mA signal isolators, limit alarms, panel meters, and math computation modules. These signal conditioning products isolate, amplify, filter, condition, and convert measured signals from sensors and other instruments. The enhanced signal is ready for interfacing to your PLC, DCS, display, recorder, or other process control instrumentation.

Signal conditioning functions:

•  Signal converter, linearizer, averager
•  Integrator, totalizer
•  Pulse counter, frequency measurement
•  Arithmetic calculation, Boolean logic
•  Limit alarm relay trip, window range, deviation, rate-of-change, peak/valley detection

Temperature Transmitters

Temperature transmitters convert thermocouple, RTD, and low-level temperature sensor signals to 4-20mA, 0-10V, or other DC voltage/current outputs. Acromag offers temperature transmitters in head-mount and DIN-rail form factors. Some temperature transmitters have software-configured universal input to convert a broad range of temperature sensor and ...

Read more...
  • Universal Temperature Transmitters
  • Universal Temperature Transmitters
  • Temperature transmitters with universal input convert a wide variety of temperature, voltage, and current input signals to 4-20mA or 0-10V DC outputs for interfacing to ...
  • Read More
  • Thermistor Input
  • Thermistor Input
  • Thermistor transmitters are used as temperature-measuring devices and in electrical circuits to compensate for temperature variations of other components.
  • Read More
  • Thermocouple Input
  • Thermocouple Input
  • Thermocouple transmitters convert Type J, K, T, E, R, S, B, C, N, or U thermocouple sensor input signals to 4-20mA or 0-10V DC outputs for interfacing to controllers or other ...
  • Read More
  • RTD Input
  • RTD Input
  • RTD transmitters convert Platinum, Copper, Nickel RTD or resistance sensor input signals to 4-20mA or 0-10V DC outputs for interfacing to controllers or other ...
  • Read More

Signal Converters, Transmitters

Process transmitters isolate, filter amplify, and convert sensor signals to 4-20mA current or 0-10V voltage signals for interfacing with controllers and other instrumentation. Select from 2-wire loop-powered 4-20mA transmitters, 3-wire DC-powered transmitters, or 4-wire AC/DC-powered transmitters. 3-wire and 4-wire models are available as 4-20mA ...

Read more...
  • DC Voltage / Current Input
  • DC Voltage / Current Input
  • These transmitters convert DC voltage or current input signals to 4-20mA or 0-10V DC outputs for interfacing to controllers or other process instrumentation.
  • Read More
  • AC Voltage / Current Input
  • AC Voltage / Current Input
  • Convert 0 to 150V AC or 0 to 20A AC input signals to 4-20mA or 0-10V DC outputs for interfacing to controllers or other instrumentation.
  • Read More
  • Millivolt Input
  • Millivolt Input
  • Convert -50 to 375mV DC sensor input signals to 4-20mA or 0-10V DC outputs for interfacing to controllers or other instrumentation.
  • Read More
  • Frequency Input
  • Frequency Input
  • Convert 0 to 50KHz frequency or 0 to 65535 pulse input signals to 4-20mA or 0-10V DC outputs for interfacing to controllers or other instrumentation.
  • Read More

  • Slidewire / Potentiometer Input
  • Slidewire / Potentiometer Input
  • Convert potentiometer, slidewire, or 0 to 500 ohm resistance input signals to 4-20mA or 0-10V DC outputs for interfacing to controllers or other instrumentation.
  • Read More
  • Strain Gage / Load Cell Input
  • Strain Gage / Load Cell Input
  • Convert strain gage (full, half, quarter bridge) or load cell sensor input signals to 4-20mA or 0-10V DC outputs for interfacing to controllers or other instrumentation.
  • Read More
  • Accessories
  • Accessories
  • Field-mount hardware includes explosion-proof, NEMA 4, NEMA 12, NEMA 4X stainless steel housings, and DIN-rail mounting brackets. NOTE: This page has moved. If you are not ...
  • Read More

Limit Alarms

Process limit alarms monitor sensor or process current input signals and trip a relay output if the input exceeds a user-defined hi/lo setpoint limit. Select from AC-, DC, and loop-powered models. Configuration is easy with Windows software, push-buttons, switches, or pots for settings depending on the series.

Read more...
  • Miscellaneous
  • Miscellaneous
  • To simplify your development, Acromag offers a variety of adapters, cables, sensors, and other components.
  • Read More
  • Mounting Hardware
  • Mounting Hardware
  • Acromag offers a variety of NEMA enclosures, connection heads, and DIN rail accessories to simplify your system installation.
  • Read More
  • Power Supplies
  • Power Supplies
  • PS5R-S Slim Line models give you all the power of a traditional power supply in only half the space. They feature universal voltage inputs and all the convenient features youfve ...
  • Read More

subscribe to newsletter

  • 877-214-6267

User login