USB-Configured Loop-Powered Temperature Transmitters

The TT-230 series of space-saving, two-wire thermocouple temperature transmitters are DC loop or local-powered. Using isolation, these transmitters protect from surges, noise, and ground loop errors.

New! USB-Configured High-Density Ethernet I/O

Click here for details

The BusWorks XT series of Ethernet I/O modules support Modbus TCP/IP, Ethernet/IP, Profinet and i2o peer-to-peer communication protocols. They monitor and/or control up to 16 discrete devices per unit with any mix of inputs and outputs supported.

Ethernet Switches

These industrial-grade switches provide reliable network communications. Select managed or unmanaged models for copper or fiber-optic cables.

BusWorks 900EN Series
5-Port Unmanaged Ethernet Switch
Rugged 5-port industrial-grade Ethernet switches have internal intelligence for fast and easy network installation with auto data rate, flow control, and cross-over. No setup needed if used as a simple switch with Acromag I/O modules.

Features
♦ -25 to 70°C range
♦ 1500V port-to-port isolation
♦ Redundant power support
♦ CE, ATEX, UL/cUL Class 1, Div 2 approvals
Model Number

Description
900EN
5-Ports, 10/100Mbps •15 to 36V DC power supply required • Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX Acromag’s five-port Ethernet switch ...

EIS Series
8-Port Managed or Unmanaged Ethernet Switch
Acromag switches are designed for harsh environments. Featuring a rugged IP30 aluminum case, 300,000 hour MTBF, and power supply redundancy, you can depend on Acromag for your network.

Managed or unmanaged operation
With web-based configuration, managed switches ensure easy installation and maintenance. Managed switches also support many powerful Ethernet features sucha s port VLAN, Quality of Service (QoS), Internet Group Management Protocol (IGMP) Snooping, and failure alarm by relay output.

Self-healing redundant ring capability (recovery time < 300mS)
Critical criteria for industrial applications is the ability to ensure non-stop system operation. Acromag switches employ redundancy to provide a self-recovery mechanism in the revent of a failure. If any length of the primary communication path fails, redundant ring technolgoy allows self-reconfiguration to provide an alternate network path. The ultra-fast recovery time protects mission-critical applicaitons from interruptions and temporary malfunctions.

Industrial Ethernet features
♦ Fast redundant ring technolgy (<300mS)
♦ Support STP and RSTP redundant protocols
♦ -10 to 70°C operating temperature range
♦ Port-to-port isolation (1200V AC)
♦ Built-in RFI/EMI and surge/transient protection
♦ Wide range 12-48V DC redundant power with reverse polarity protection
♦ IEEE 802.3, 3u, 3x compliant
♦ Fault alarm relay
Model Number

Description
EIS-408
Copper & Fiber Web-Managed with Redundancy Industrial Ethernet Switch • 6-Port Copper & 2-Port Fiber Web-Managed with Redundancy • 12 to 48V DC power ...